Vacuum Machine Parts

24V DC power supply for the MSK brine injector. It steps the voltage down to run the HMI touchscreen, taking a 220VAC input.

Compatibility: Promarks MSK brine injector.

Plug for the right side of the cushion bar.

Compatibility: Promarks DC-series double chamber vacuum sealers: DC-530, DC-640-H, DC-650-H, DC-800, DC-860-H and DC-900.

Plug for the left side of the cushion bar.

Compatibility: Promarks DC-series double chamber vacuum sealers: DC-530, DC-640-H, DC-650-H, DC-800, DC-860-H and DC-900.

Piston that sits inside the 2″ white vent valve. The vent valve lets air back into the chamber after the vacuum cycle; vacuum pressure and a spring move the piston.

Compatibility: All 2″ white valves on Promarks vacuum chamber machines.

8mm pin that secures the air head on the brine injector. Removing two pins lets the upper air head hinge back so the injector needles can be taken out easily. Buy one pin as a replacement or two for a full set.

Compatibility: Promarks MSK-32 and MSK-56 commercial brine injectors.

Hinge pin, 62mm overall length.

Compatibility: Promarks table top models TC-350 and TC-420, and single chamber model SC-420LR.

Hinge pin, 42mm overall length. It fastens the lid hinge to the frame of the machine.

Compatibility: Promarks TC-420F/LR table top chamber vacuum sealer.

Photo-eye for tumblers with serial numbers PF13102424 and later.

Compatibility: Promarks TM-150, TM-300 and TM-500 vacuum tumblers, serial number PF13102424 and after.

PCB control panel for Promarks, Promax, Bertoldi's and Aline vacuum chamber machines.

Compatibility: Promarks / Promax / Bertoldi's / Aline vacuum chamber sealers: TC-280, TC-350, TC-420, TC-520, SC-420, SC-520, SC-680, SC-800 and DC-530.

Fixed-mount phenolic plate for quick-disconnect seal bars.

Compatibility: Promarks double chamber models with quick disconnect: DC-530, DC-640-H, DC-650-H and DC-900.

12-button overlay for the PNC-01 board.

Peel-and-stick overlay for the PD-01 PCB front panel, new style with the STOP button at the bottom right.

Compatibility: Promarks / Promax PD-01 PCB front panel.

O-ring for the piston.

Compatibility: Promarks SS-50 and SS-65 stuffers.

O-ring for the piston in the 2″ white plastic valve on Promarks vacuum chamber machines. Made of Viton, which holds up to the oil from Promarks oil pumps much longer than typical O-ring materials.

Compatibility: Promarks vacuum chamber sealers with a 2″ valve.

O-ring for the area around the needle on the MSK-16 brine injector, where it keeps brine from escaping the needle during operation. Made of Viton, which holds up to the oil from Promarks oil pumps much longer than O-rings made of other materials.

Compatibility: Promarks MSK-16 brine injector.

O-ring for the needle tube on MSK-series injectors.

Compatibility: Promarks MSK-32 and MSK-98 brine injecting machines.

P42 O-ring used on Promarks MSK injectors.

Compatibility: Promarks MSK-series commercial brine injectors: MSK-16, MSK-22, MSK-32, MSK-44, MSK-56, MSK-98 and MSK-195.

O-ring for the aluminum spacer.

Compatibility: Promarks table top models TC-280F, TC-350, TC-420, TC-520; single chamber models SC-420LR, SC-520, SC-680, SC-800LR; double chamber models DC-530, DC-640-H, DC-650-H, DC-800, DC-860-H, DC-900.

O-ring that seals around the stem of the pressure bag. It is worth keeping a spare on hand so downtime stays short.

Compatibility: Promarks chamber vacuum sealers.

O-ring for the internal brine flow on MSK injectors.

Compatibility: Promarks MSK-32 and MSK-98 commercial brine injectors, MSK series.

Needle connector that joins the needle to the brine manifold on the MSK-16 injector head.

Compatibility: Promarks MSK-16 commercial brine injector.