Vacuum pump oil, 15 weight food grade, USDA and CFIA approved, suitable for all types of vacuum pumps, including Busch, Leybold and Sogevac.
This vacuum pump oil is primarily used in 1.25HP (021) vacuum pumps and smaller. It can also be used in larger vacuum pumps where cold start-ups or low voltage are a problem.
Busch Vacuum Pump Oil R-590 - 30 weight
Regular price$19.50 USD
Save $-19.50 USD
Vacuum pump oil, 30 weight food grade, USDA and CFIA approved, suitable for all types of vacuum pumps, including Busch, Leybold, Rietschle and Sogevac.
This oil is used in 2HP (040) vacuum pumps and larger.
Promarks Seal Wire 10mm for all DC models, priced per foot
Regular price$8.00 USD
Save $0.00 USD
10mm flat seal wire. This wire is used in all Promarks double chamber machines.
Promarks Lid Spring for Model DC-800
Regular price
$243.75 USDSale price$205.00 USD
Save $38.75 USD
Promarks Seal Wire - Round cut-off, priced per foot
Regular price
$10.00 USDSale price$6.25 USD
Save $3.75 USD
This cut-off sealwire is used in combination with 3.5mm concave seal wire
Promarks Seal Wire 3.5mm Concave - priced per foot
Regular price
$8.00 USDSale price$6.25 USD
Save $1.75 USD
This sealwire is usually used in combination with a cut-off seal wire.
Promarks Sealbar End for 6mm and 10mm flat seal wires
Regular price
$24.50 USDSale price$19.50 USD
Save $5.00 USD
Promarks Silicone Seal Rubber for all or most Promarks Double Chamber Models, PRICED AND SOLD PER FOOT
Regular price
$23.50 USDSale price$17.95 USD
Save $5.55 USD
This stricker bar silicone rubber fits all Promarks double chamber machines. 17mm x 8mm
Promarks Lid Spring for Model DC-650
Regular price
$239.75 USDSale price$191.00 USD
Save $48.75 USD
Spring size: 210mm long, 63mm spring diameter, 7mm wire diameter (approx. 8 1/4" x 2 1/2" x 1/4")
Promarks Lid Spring for Model DC-640
Regular price
$195.00 USDSale price$165.00 USD
Save $30.00 USD
Spring size: 190mm long, 60mm spring diameter, 6.5mm wire diameter (approx. 7.5" x 2 3/8" x 1/4")
Promarks Lid Hydraulic for Model TC-420
Regular price
$118.75 USDSale price$110.00 USD
Save $8.75 USD
Promarks PNC-01 Digital Control Board
Regular price$1,375.00 USD
Save $-1,375.00 USD
Fits most Promarks Vacuum Machines
Promarks Sealbar End for Cut/Seal Wire Combination
Regular price
$24.50 USDSale price$19.50 USD
Save $5.00 USD
This fitting accommodates the 3.5mm concave seal wire and the round cut-off wire combination.
Promarks Silicone Seal Rubber for Model SC-680, PRICED AND SOLD PER FOOT
Regular price
$21.25 USDSale price$14.00 USD
Save $7.25 USD
This stricker bar silicone rubber only fits Promarks Model SC-680. Dimensions: 28mm x 8mm
Promarks Sealbar End White Nylon Insulator
Regular price
$9.50 USDSale price$5.99 USD
Save $3.51 USD
Promarks PD-01 Digital Control Board
Regular price
$999.00 USDSale price$825.00 USD
Save $174.00 USD
This board is interchangeable with PNC-01 and PA-01 boards on some machines.
Promarks Airbag (Seal Bladder) for Model DC800 FRONT SEAL BAR
Regular price$172.50 USD
Save $-172.50 USD
Please note: The bladder for the front seal bar is different from the back seal bar.
Bladder size: 28" x 4.25" (710mm x 110mm)
Promarks Airbag (Seal Bladder) for Model DC800 BACK SEAL BAR
Regular price$172.50 USD
Save $-172.50 USD
Please note: The bladder for the back seal bar is different from the front seal bar.
Bladder size: 28" x 4.25" (710mm x 110mm)
Promarks Seal Bar Airbag for Model SC-680
Regular price$123.75 USD
Save $-123.75 USD
Promarks PA-01 Analog Control Board
Regular price$599.00 USD
Save $-599.00 USD
Suitable for tabletop and smaller floor model machines. Interchangeable with some of the digital boards.
Sipromac/Berkel/Promarks Lid Gasket D-Profile
Regular price
$12.00 USDSale price$9.00 USD
Save $3.00 USD
This lid gasket is ideal for overcoming larger than usual lid tolerances. It can be used on a number of different machines with 1/2" lid gasket requirements. Replaces round 1/2" gasket on Sipromac and Berkel vacuum machines, and lipped 1/2" OEM gasket on Promarks vacuum packaging machines.