Vacuum Machine Parts

Quick-disconnect seal bar.

Compatibility: Promarks DC-860 double chamber vacuum sealer.

Seal bar assembly with a cut-off wire, built with a concave seal and a round cut wire. It is a quick-disconnect bar: push the pins in and remove the bar without tools.

Compatibility: Promarks DC-640 and DC-650 double chamber vacuum sealers.

Seal bar with a cut-off wire.

Compatibility: Promarks DC-530 double chamber vacuum sealer.

Quick-disconnect seal bar assembly with a 10mm heat strip. No tools are needed to replace it: push in the two pins at either end and lift the bar out.

Compatibility: Promarks DC-640 and DC-650 double chamber vacuum sealers.

Seal and cut seal bar assembly for the TC-420LR.

Compatibility: Promarks TC-420LR table top chamber vacuum sealer.

Seal and cut seal bar assembly.

Compatibility: Promarks TC-280 table top chamber vacuum sealer.

Quick-disconnect seal bar assembly with a 10mm seal.

Compatibility: Promarks DC-800 double chamber vacuum sealer.

Seal bar assembly with a 6mm seal.

Compatibility: Promarks TC-280 table top vacuum chamber sealer.

Seal bar assembly with a 6mm seal, for the 520 models.

Compatibility: Promarks TC-520 table top and SC-520 single chamber vacuum sealers.

Stainless steel roller located at the conveyor of the brine injector, where it advances the product during the conveyor stage.

Compatibility: Promarks MSK-32 and MSK-56 commercial brine injectors.

Plastic roller that moves the product along the conveyor on the brine injector.

Compatibility: Promarks MSK-32 and MSK-56 commercial brine injectors.

Digital Festo pressure switch, sold without the mount (the mount is a separate item). It measures and adjusts the vacuum pressure inside the tumbler drum while the machine is running.

Compatibility: Promarks vacuum tumblers with serial numbers from PF13102424 to PF15062523.

Rod end for the gas shock on the TC-420.

Compatibility: Promarks TC-420 table top chamber vacuum sealer.

Pressure bag (seal bellow). Over time the bellow can wear and stop rising far enough during the seal cycle to make a secure seal, so replace it when seals start to suffer.

Compatibility: Promarks DC-640 and DC-650 double chamber vacuum sealers.

Pressure bag (seal bellow) for the TC-420LR.

Compatibility: Promarks TC-420LR table top chamber vacuum sealer.

Front-position pressure bag for DC-800 machines built before 2012. It pushes the upper seal bar down against the cushion bar to seal the pouch.

Compatibility: Promarks DC-800 double chamber vacuum sealer, made before 2012.

Back-position pressure bag for DC-800 machines with offset stems built before 2012. It pushes the upper bar down against the lower cushion bar to seal the pouch.

Compatibility: Promarks DC-800 double chamber vacuum sealer with offset stems, made before 2012.

Pressure bag that plays a key part in sealing on the TC-520F/LR. It lifts the lower bar against the upper bar to seal the pouch.

Compatibility: Promarks TC-520 table top vacuum chamber sealer.

Pressure bag that lifts the lower cushion bar against the upper seal bar to seal the pouch.

Compatibility: Promarks SC-800LR single chamber vacuum sealer.

Pressure bag that works on vacuum pressure to lift the lower cushion bar against the upper seal bar, creating a seal on the pouch.

Compatibility: Promarks SC-680 single chamber vacuum sealer.

PNC-01 digital control panel for vacuum sealers.

Compatibility: Promarks single chamber models SC-680 and SC-800 LR; double chamber models DC-530, DC-640-H, DC-650-H, DC-800, DC-860-H and DC-900; and Ultravac 880.