Vacuum Machine Parts

Base for the timer on the ST-10 dip tank. Pairs with the ST-10 timer.

Compatibility: Promarks ST-10 shrink tank.

Tumbler bearing with a 2-bolt flange and screw lock, for Promarks vacuum tumblers.

Compatibility: Promarks TM-series tumblers (TM-150, TM-300, TM-500, TM-1000T) and TMC-series tumblers (TMC-150, TMC-300, TMC-500, TMC-1000).

Round cut-off bar end for quick-disconnect seal bars that have the cut-off option. Quick-disconnect seal bars come off without tools, which makes replacement easy. Use only with quick-disconnect seal bars that include the cut-off feature.

Compatibility: Promarks DC-530, DC-640-H, DC-650-H, DC-800, DC-860-H and DC-900 double chamber vacuum sealers.

Round bar end for 10mm seal wire, designed for quick-disconnect seal bars.

Compatibility: Promarks double chamber models DC-530, DC-640-H, DC-650-H, DC-800 and DC-900.

Rectangular bar end for seal bars that use a cut-off wire.

Compatibility: Promarks single chamber models SC-680 and SC-800LR.

Rectangular bar end for 10mm seal wire, with an undercut that accepts the L-shaped piece.

Compatibility: Promarks SC-800 LR and double chamber models DC-530, DC-640-H, DC-650-H, DC-800, DC-860-H, DC-900.

Bar end for seal bars that carry both a seal wire and a cut wire.

Compatibility: Promarks table top models TC-280F, TC-350, TC-520 and single chamber models SC-420LR, SC-520, SC-680, SC-800 LR.

Round bar end that holds a 10mm seal wire. It does not accept the L-shaped piece.

Compatibility: Promarks SC-800 LR, DC-860-H and DC-900.

Bar end that holds one 6mm seal wire in place. Brass securing screws are included.

Compatibility: Promarks table top models TC-280F, TC-350, TC-420, TC-520 and single chamber models SC-420LR, SC-520, SC-680.

Black 8mm tubing, priced and sold per foot.

Three-port solenoid valve with a 24VAC coil. It inflates the pressure bags that push the seal bars down so the pouch is clamped against the lower cushion bar and sealed.

Compatibility: Promarks double chamber vacuum sealers DC-530, DC-640-H, DC-650-H, DC-800, DC-860-H and DC-900.

49mm vacuum gauge for reading chamber vacuum.

Compatibility: Promarks TC-520; SC-420LR, SC-520, SC-800LR; DC-640-H, DC-800, DC-860-H, DC-900.

Silicone gasket for 1-1/2″ Tri-Clamp fittings.

25A slow-blow fuse.

Compatibility: Promarks table top (TC) models TC-280F, TC-350, TC-420, TC-520; single chamber (SC) models SC-420LR, SC-520, SC-680, SC-800LR; double chamber (DC) models DC-530, DC-640-H, DC-650-H, DC-800, DC-860-H, DC-900.

Emergency-stop switch with a 110/220V bulb and both normally open (NO) and normally closed (NC) contacts.

Compatibility: Promarks MX-100 mixer and TM-series vacuum tumblers: TM-20, TM-40, TM-150, TM-300, TM-500, TM-2000, TM-3000 and TM-5000.

O-ring for the air piston in the MSK injector head.

Compatibility: Promarks MSK-32 and MSK-98 brine injecting machines.

5mm set screw that fastens the seal bar end.

Compatibility: Promarks DC-800 double chamber vacuum sealer.

Replacement plug for the lid spring, with a 45mm outer diameter and a 10mm threaded hole. The split pin is included.

Compatibility: Promarks DC800, DC860, DC900 and Koch 880 double chamber vacuum sealers.

Rebuild kit for the 2″ Mebner vent valve on Promarks machines built before 2008. The vent valve lets air back into the chamber after the vacuum-seal cycle finishes.

Compatibility: Promarks DC-800 (with 2″ Mebner vent valves), DC-900 and Koch 880, all made before 2008.

Replacement 2″ vacuum valve (black) for first-generation Promarks chamber vacuum machines. This is a German-made Mebner valve with 2″ NPT connections that combines the vacuum and vent functions. A 24VAC solenoid coil is standard on the Koch 880; 24VDC and 110VAC coils are available on request.

Compatibility: Promarks DC800, DC900 and Koch 880 double chamber vacuum sealers.

Rebuild kit for replacing the internals of the 2″ Mebner vacuum valve on Promarks chamber vacuum machines built before 2008. The vacuum valve lets air out of the chamber during the vacuum cycle. This kit is for 2″ vacuum valves only.

Compatibility: Promarks DC-800 and DC-900, and Koch 880, all made before 2008.